Downloads
Quick links to downloads
only dB35 Software from Casella CEL
dB35 and all the Microsoft SQL server installation
files
dBadge instrument firmware upgrade files
dB35 SOFTWARE ONLY -
Click on the link below to download just the latest version of the dB35
database software.
Currently at version 2.04.
The dB35 zipped format update file consists of the following two
compressed files ;
SETUP.EXE -
the main installation file,
SETUP.MSI - the compressed cabinet file
If you are using Mozilla Firefox then right click this
link and select "Save link as.."
If you are using MS Internet Explorer then select "Save target as..".
Download the zipped file to your local hard drive into a
temporary folder then unzip it with a program such as
WinZip
 .
There should be 2 files in this compressed file. You must first uninstall the current
older version of dB35 using the usual Windows Control Panel - Add or Remove programs. Find
the entry "CEL Soundtrack dB35" and click on "Remove" to uninstall it from you
computer. All your datafiles will remain safe in a separate folder. Run the
new program file SETUP.EXE to reinstall this version into the same folder as
the original so that your existing shortcut links still point to the right
locations. Select About | About dB35.. to check that the new version is now
showing 2.04.
dB35 FULL INSTALL -
Click on the link below to download the latest version of the full dB35 software
including all the necessary Microsoft dotnetfx and SQL database installation
files. Note that there are lots of compressed files in this zip file and that the
total size is about 119 MB. Download may take a long time depending on your
connection speed!!
Download the zipped file to your local hard drive into a
temporary folder then unzip it with a program such as
WinZip
.
This single zipped file is a compressed version of all the normal
installation files that
are provided on the distribution CD with current dBadge dosimeter kits. You should unzip the files
to a temporary folder so that you can burn the contents onto a blank CDROM
to use as a backup for the future. The temp folder should be called
"C:\db35" for example. Use the unzip program to extract the compressed files
into their original folders so that the installation process will proceed as
intended.
dBadge FIRMWARE - Click on the link below to download the latest version of the
instrument firmware for the
dBadge. Currently at
version 1.07.
The firmware update file consists of the following 3 files as follows;
C350.IMG - the image file for the
dBadge
QUPG350.EXE - the executable file to perform the upgrade
UPGHELP.TXT - the small help file with upgrade instructions
Download the zipped file to your local hard drive into a
temporary folder then unzip it with a program such as
WinZip
.
Open and, preferably, print the UPGHELP.TXT text file and follow the instructions to perform the
firmware upgrade. You will need the CMC39 Infra red interface unit connected
to either comm. port1 or comm. port2 on your pc to perform this upgrade. Please note
that all stored run data will be erased in this upgrade so be sure to
download any new runs to dB35 before attempting to upgrade a
dBadge. Upgrading
each instrument will only take a couple of minutes to perform. |
